0
     €ВБ„i–ЂАїГ ?ч     /* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_IRQ_H
#define _LINUX_IRQ_H

/*
 * Please do not include this file in generic code.  There is currently
 * no requirement for any architecture to implement anything held
 * within this file.
 *
 * Thanks. --rmk
 */

#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/cpumask.h>
#include <linux/irqhandler.h>
#include <linux/irqreturn.h>
#include <linux/irqnr.h>
#include <linux/topology.h>
#include <linux/io.h>
#include <linux/slab.h>

#include <asm/irq.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>

#include <linux/rh_kabi.h>

struct seq_file;
struct module;
struct msi_msg;
struct irq_affinity_desc;
enum irqchip_irq_state;

/*
 * IRQ line status.
 *
 * Bits 0-7 are the same as the IRQF_* bits in linux/interrupt.h
 *
 * IRQ_TYPE_NONE		- default, unspecified type
 * IRQ_TYPE_EDGE_RISING		- rising edge triggered
 * IRQ_TYPE_EDGE_FALLING	- falling edge triggered
 * IRQ_TYPE_EDGE_BOTH		- rising and falling edge triggered
 * IRQ_TYPE_LEVEL_HIGH		- high level triggered
 * IRQ_TYPE_LEVEL_LOW		- low level triggered
 * IRQ_TYPE_LEVEL_MASK		- Mask to filter out the level bits
 * IRQ_TYPE_SENSE_MASK		- Mask for all the above bits
 * IRQ_TYPE_DEFAULT		- For use by some PICs to ask irq_set_type
 *				  to setup the HW to a sane default (used
 *                                by irqdomain map() callbacks to synchronize
 *                                the HW state and SW flags for a newly
 *                                allocated descriptor).
 *
 * IRQ_TYPE_PROBE		- Special flag for probing in progress
 *
 * Bits which can be modified via irq_set/clear/modify_status_flags()
 * IRQ_LEVEL			- Interrupt is level type. Will be also
 *				  updated in the code when the above trigger
 *				  bits are modified via irq_set_irq_type()
 * IRQ_PER_CPU			- Mark an interrupt PER_CPU. Will protect
 *				  it from affinity setting
 * IRQ_NOPROBE			- Interrupt cannot be probed by autoprobing
 * IRQ_NOREQUEST		- Interrupt cannot be requested via
 *				  request_irq()
 * IRQ_NOTHREAD			- Interrupt cannot be threaded
 * IRQ_NOAUTOEN			- Interrupt is not automatically enabled in
 *				  request/setup_irq()
 * IRQ_NO_BALANCING		- Interrupt cannot be balanced (affinity set)
 * IRQ_MOVE_PCNTXT		- Interrupt can be migrated from process context
 * IRQ_NESTED_THREAD		- Interrupt nests into another thread
 * IRQ_PER_CPU_DEVID		- Dev_id is a per-cpu variable
 * IRQ_IS_POLLED		- Always polled by another interrupt. Exclude
 *				  it from the spurious interrupt detection
 *				  mechanism and from core side polling.
 * IRQ_DISABLE_UNLAZY		- Disable lazy irq disable
 * IRQ_HIDDEN			- Don't show up in /proc/interrupts
 * IRQ_NO_DEBUG			- Exclude from note_interrupt() debugging
 */
enum {
	IRQ_TYPE_NONE		= 0x00000000,
	IRQ_TYPE_EDGE_RISING	= 0x00000001,
	IRQ_TYPE_EDGE_FALLING	= 0x00000002,
	IRQ_TYPE_EDGE_BOTH	= (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
	IRQ_TYPE_LEVEL_HIGH	= 0x00000004,
	IRQ_TYPE_LEVEL_LOW	= 0x00000008,
	IRQ_TYPE_LEVEL_MASK	= (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
	IRQ_TYPE_SENSE_MASK	= 0x0000000f,
	IRQ_TYPE_DEFAULT	= IRQ_TYPE_SENSE_MASK,

	IRQ_TYPE_PROBE		= 0x00000010,

	IRQ_LEVEL		= (1 <<  8),
	IRQ_PER_CPU		= (1 <<  9),
	IRQ_NOPROBE		= (1 << 10),
	IRQ_NOREQUEST		= (1 << 11),
	IRQ_NOAUTOEN		= (1 << 12),
	IRQ_NO_BALANCING	= (1 << 13),
	IRQ_MOVE_PCNTXT		= (1 << 14),
	IRQ_NESTED_THREAD	= (1 << 15),
	IRQ_NOTHREAD		= (1 << 16),
	IRQ_PER_CPU_DEVID	= (1 << 17),
	IRQ_IS_POLLED		= (1 << 18),
	IRQ_DISABLE_UNLAZY	= (1 << 19),
	IRQ_HIDDEN		= (1 << 20),
	IRQ_NO_DEBUG		= (1 << 21),
};

#define IRQF_MODIFY_MASK	\
	(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
	 IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
	 IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID | \
	 IRQ_IS_POLLED | IRQ_DISABLE_UNLAZY | IRQ_HIDDEN)

#define IRQ_NO_BALANCING_MASK	(IRQ_PER_CPU | IRQ_NO_BALANCING)

/*
 * Return value for chip->irq_set_affinity()
 *
 * IRQ_SET_MASK_OK	- OK, core updates irq_common_data.affinity
 * IRQ_SET_MA