9.8
!ˆ
ƒ {ËÃÉ 6 !
Index of /anon_sym/anon/proc/2629315/net/dev_snmp6
Index of /anon_sym/anon/proc/2629315/net/dev_snmp6
#ˆÁÇ
ƒi·ÀÃÉ Ò #/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _ULTRASOUND_H_
#define _ULTRASOUND_H_
/*
* ultrasound.h - Macros for programming the Gravis Ultrasound
* These macros are extremely device dependent
* and not portable.
*/
/*
* Copyright (C) by Hannu Savolainen 1993-1997
*
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
* Version 2 (June 1991). See the "COPYING" file distributed with this software
* for more info.
*/
/*
* Private events for Gravis Ultrasound (GUS)
*
* Format:
* byte 0 - SEQ_PRIVATE (0xfe)
* byte 1 - Synthesizer device number (0-N)
* byte 2 - Command (see below)
* byte 3 - Voice number (0-31)
* bytes 4 and 5 - parameter P1 (unsigned short)
* bytes 6 and 7 - parameter P2 (unsigned short)
*
* Commands:
* Each command affects one voice defined in byte 3.
* Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
* _GUS_NUMVOICES - Sets max. number of concurrent voices (P1=14-31, default 16)
* _GUS_VOICESAMPLE- ************ OBSOLETE *************
* _GUS_VOICEON - Starts voice (P1=voice mode)
* _GUS_VOICEOFF - Stops voice (no parameters)
* _GUS_VOICEFADE - Stops the voice smoothly.
* _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode)
* _GUS_VOICEBALA - Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
* _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz)
* _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* (Like GUS_VOICEVOL but doesn't change the hw
* volume. It just updates volume in the voice table).
*
* _GUS_RAMPRANGE - Sets limits for volume ramping (P1=low volume, P2=high volume)
* _GUS_RAMPRATE - Sets the speed for volume ramping (P1=scale, P2=rate)
* _GUS_RAMPMODE - Sets the volume ramping mode (P1=ramping mode)
* _GUS_RAMPON - Starts volume ramping (no parameters)
* _GUS_RAMPOFF - Stops volume ramping (no parameters)
* _GUS_VOLUME_SCALE - Changes the volume calculation constants
* for all voices.
*/
#define _GUS_NUMVOICES 0x00
#define _GUS_VOICESAMPLE 0x01 /* OBSOLETE */
#define _GUS_VOICEON 0x02
#define _GUS_VOICEOFF 0x03
#define _GUS_VOICEMODE 0x04
#define _GUS_VOICEBALA 0x05
#define _GUS_VOICEFREQ 0x06
#define _GUS_VOICEVOL 0x07
#define _GUS_RAMPRANGE 0x08
#define _GUS_RAMPRATE 0x09
#define _GUS_RAMPMODE 0x0a
#define _GUS_RAMPON 0x0b
#define _GUS_RAMPOFF 0x0c
#define _GUS_VOICEFADE 0x0d
#define _GUS_VOLUME_SCALE 0x0e
#define _GUS_VOICEVOL2 0x0f
#define _GUS_VOICE_POS 0x10
/*
* GUS API macros
*/
#define _GUS_CMD(chn, voice, cmd, p1, p2) \
{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
_seqbuf[_seqbufptr+3] = voice;\
*(unsigned short*)&_seqbuf[_seqbufptr+