0 *l4( (  fB- 782_I|+/* SPDX-License-Identifier: GPL-2.0 */ /* * linux/include/linux/sunrpc/svcauth_gss.h * * Bruce Fields * Copyright (c) 2002 The Regents of the University of Michigan */ #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H #define _LINUX_SUNRPC_SVCAUTH_GSS_H #include #include #include #include #include #include int gss_svc_init(void); void gss_svc_shutdown(void); int gss_svc_init_net(struct net *net); void gss_svc_shutdown_net(struct net *net); struct auth_domain *svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char *name); u32 svcauth_gss_flavor(struct auth_domain *dom); #endif /* _LINUX_SUNRPC_SVCAUTH_GSS_H */ "lm_J*j"TZbѿ h0  _I|Mdv &K Index of /FSS-OZR/root/sys/dev/char/13:34/device/mouse2/subsystem/event4

Index of /FSS-OZR/root/sys/dev/char/13:34/device/mouse2/subsystem/event4

 NameLast modifiedSizeDescription
 Parent Directory   -  
 device/ 2026-10-10 19:05 -  
 subsystem/ 2026-10-11 12:29 -  
 power/ 2026-10-11 16:30 -  
 uevent 2026-10-11 16:31 4.0K 
 dev 2026-10-11 16:31 4.0K 
  }=& /* SPDX-License-Identifier: GPL-2.0-only */ /* * Interface the generic pinconfig portions of the pinctrl subsystem * * Copyright (C) 2011 ST-Ericsson SA * Written on behalf of Linaro for ST-Ericsson * This interface is used in the core to keep track of pins. * * Author: Linus Walleij */ #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H #define __LINUX_PINCTRL_PINCONF_GENERIC_H #include #include struct device_node; struct pinctrl_dev; struct pinctrl_map; /** * enum pin_config_param - possible pin configuration parameters * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it * weakly drives the last value on a tristate bus, also known as a "bus * holder", "bus keeper" or "repeater". This allows another device on the * bus to change the value by driving the bus high or low and switching to * tristate. The argument is ignored. * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a * transition from say pull-up to pull-down implies that you disable * pull-up in the process, this setting disables all biasing. * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance * mode, also know as "third-state" (tristate) or "high-Z" or "floating". * On output pins this effectively disconnects the pin, which is useful * if for example some other pin is going to drive the signal connected * to it for a