0 " lm_J*j"T~.bѿ h" lm_J*j"T~q)F h+l=J!e8Ep Tţ q]k_I|+" lm_J*j"T~!Jbѿ h"lm_J*j"T~. bѿ h MAJOR=7 MINOR=3 DEVNAME=vcs3  MAJOR=4 MINOR=49 DEVNAME=tty49  MAJOR=4 MINOR=26 DEVNAME=tty26 auto ?/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * PCI standard defines * Copyright 1994, Drew Eckhardt * Copyright 1997--1999 Martin Mares * * For more information, please consult the following manuals (look at * http://www.pcisig.com/ for how to get them): * * PCI BIOS Specification * PCI Local Bus Specification * PCI to PCI Bridge Specification * PCI System Design Guide * * For HyperTransport information, please consult the following manuals * from http://www.hypertransport.org : * * The HyperTransport I/O Link Specification */ #ifndef LINUX_PCI_REGS_H #define LINUX_PCI_REGS_H /* * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of * configuration space. */ #define PCI_CFG_SPACE_SIZE 256 #define PCI_CFG_SPACE_EXP_SIZE 4096 /* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ #define PCI_STD_HEADER_SIZEOF 64 #define PCI_STD_NUM_BARS 6 /* Number of standard BARs */ #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ #define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ #define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ #define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ #define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ #define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ #define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ #define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ #define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ #define PCI_COMMAND_SERR 0x100 /* Enable SERR */ #define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_IMM_READY 0x01 /* Immediate Readiness */ #define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ #define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */ #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ #define PCI_STATUS_PARITY 0x100 /* Detected parity error */ #define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ #define PCI_STATUS_DEVSEL_FAST 0x000 #define PCI_STATUS_DEVSEL_MEDIUM 0x200 #define PCI_STATUS_DEVSEL_SLOW 0x400 #define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ #define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ #define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ #define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ #define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ #define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ #define PCI_REVISION_ID 0x08 /* Revision ID */ #define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ #define PCI_CLASS_DEVICE 0x0a /* Device class */ #define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ #define PCI_LATENCY_TIMER 0x0d /* 8 bits */ #define PCI_HEADER_TYPE 0x0e /* 8 bits */ #define PCI_HEADER_TYPE_MASK 0x7f #define PCI_HEADER_TYPE_NORMAL 0 #define PCI_HEADER_TYPE_BRIDGE 1 #define PCI_HEADER_TYPE_CARDBUS 2 #define PCI_HEADER_TYPE_MFD 0x80 /* Multi-Function Device (possible) */ #define PCI_BIST 0x0f /* 8 bits */ #define PCI_BIST_CODE_MASK 0x0f /* Return result */ #define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ #define PCI_