HID Keyboard ˆ¾Ä ƒh¹ÁÆ2350029075 ˆ ƒ÷ÈÁÆú Index of /FSS-OZR/root/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/endpoints

Index of /FSS-OZR/root/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/endpoints

Name	Last modified	Size

Parent Directory		-
__pycache__/	2024-10-22 12:51	-

ˆÅÄ ƒmñ;ÃÁÆ'/* SPDX-License-Identifier: GPL-2.0 * * SuperH FLCTL nand controller * * Copyright Â© 2008 Renesas Solutions Corp. */ #ifndef __SH_FLCTL_H__ #define __SH_FLCTL_H__ #include #include #include #include #include /* FLCTL registers */ #define FLCMNCR(f) (f->reg + 0x0) #define FLCMDCR(f) (f->reg + 0x4) #define FLCMCDR(f) (f->reg + 0x8) #define FLADR(f) (f->reg + 0xC) #define FLADR2(f) (f->reg + 0x3C) #define FLDATAR(f) (f->reg + 0x10) #define FLDTCNTR(f) (f->reg + 0x14) #define FLINTDMACR(f) (f->reg + 0x18) #define FLBSYTMR(f) (f->reg + 0x1C) #define FLBSYCNT(f) (f->reg + 0x20) #define FLDTFIFO(f) (f->reg + 0x24) #define FLECFIFO(f) (f->reg + 0x28) #define FLTRCR(f) (f->reg + 0x2C) #define FLHOLDCR(f) (f->reg + 0x38) #define FL4ECCRESULT0(f) (f->reg + 0x80) #define FL4ECCRESULT1(f) (f->reg + 0x84) #define FL4ECCRESULT2(f) (f->reg + 0x88) #define FL4ECCRESULT3(f) (f->reg + 0x8C) #define FL4ECCCR(f) (f->reg + 0x90) #define FL4ECCCNT(f) (f->reg + 0x94) #define FLERRADR(f) (f->reg + 0x98) /* FLCMNCR control bits */ #define _4ECCCNTEN (0x1 << 24) #define _4ECCEN (0x1 << 23) #define _4ECCCORRECT (0x1 << 22) #define SHBUSSEL (0x1 << 20) #define SEL_16BIT (0x1 << 19) #define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/ #define QTSEL_E (0x1 << 17) #define ENDIAN (0x1 << 16) /* 1 = little endian */ #define FCKSEL_E (0x1 << 15) #define ACM_SACCES_MODE (0x01 << 10) #define NANWF_E (0x1 << 9) #define SE_D (0x1 << 8) /* Spare area disable */ #define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */ #define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */ #define TYPESEL_SET (0x1 << 0) /* * Clock settings using the PULSEx registers from FLCMNCR * * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E * to control the clock divider used between the High-Speed Peripheral Clock * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16 * bit version the divider is seperate for the pulse width of high and low * signals. */ #define PULSE3 (0x1 << 27) #define PULSE2 (0x1 << 17) #define PULSE1 (0x1 << 15) #define PULSE0 (0x1 << 9) #define CLK_8B_0_5 PULSE1 #define CLK_8B_1 0x0 #define CLK_8B_1_5 (PULSE1 | PULSE2) #define CLK_8B_2 PULSE0 #define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2) #define CLK_8B_4 (PULSE0 | PULSE2) #define CLK_16B_6L_2H PULSE0 #define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2) #define CLK_16B_12L_4H (PULSE0 | PULSE2) /* FLCMDCR control bits */ #define ADRCNT2_E (0x1 << 31) /* 5byte address enable */ #define ADRMD_E (0x1 << 26) /* Sector address access */ #define CDSRC_E (0x1 << 25) /* Data buffer selection */ #define DOSR_E (0x1 << 24) /* Status read check */ #define SELRW (0x1 << 21) /* 0:read 1:write */ #define DOADR_E (0x1 << 20) /* Address stage execute */