1 *l4( (  fB- {_I|+/* SPDX-License-Identifier: GPL-2.0-only */ /* linux/amba/pl093.h * * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * * AMBA PL093 SSMC (synchronous static memory controller) * See DDI0236.pdf (r0p4) for more details */ #define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */ /* Offsets for SMBxxxxRy registers */ #define SMBIDCYR (0x00) #define SMBWSTRDR (0x04) #define SMBWSTWRR (0x08) #define SMBWSTOENR (0x0C) #define SMBWSTWENR (0x10) #define SMBCR (0x14) #define SMBSR (0x18) #define SMBWSTBRDR (0x1C) /* Masks for SMB registers */ #define IDCY_MASK (0xf) #define WSTRD_MASK (0xf) #define WSTWR_MASK (0xf) #define WSTOEN_MASK (0xf) #define WSTWEN_MASK (0xf) /* Notes from datasheet: * WSTOEN <= WSTRD * WSTWEN <= WSTWR * * WSTOEN is not used with nWAIT */ /* SMBCR bit definitions */ #define SMBCR_BIWRITEEN (1 << 21) #define SMBCR_ADDRVALIDWRITEEN (1 << 20) #define SMBCR_SYNCWRITE (1 << 17) #define SMBCR_BMWRITE (1 << 16) #define SMBCR_WRAPREAD (1 << 14) #define SMBCR_BIREADEN (1 << 13) #define SMBCR_ADDRVALIDREADEN (1 << 12) #define SMBCR_SYNCREAD (1 << 9) #define SMBCR_BMREAD (1 << 8) #define SMBCR_SMBLSPOL (1 << 6) #define SMBCR_WP (1 << 3) #define SMBCR_WAITEN (1 << 2) #define SMBCR_WAITPOL (1 << 1) #define SMBCR_RBLE (1 << 0) #define SMBCR_BURSTLENWRITE_MASK (3 << 18) #define SMBCR_BURSTLENWRITE_4 (0 << 18) #define SMBCR_BURSTLENWRITE_8 (1 << 18) #define SMBCR_BURSTLENWRITE_RESERVED (2 << 18) #define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18) #define SMBCR_BURSTLENREAD_MASK (3 << 10) #define SMBCR_BURSTLENREAD_4 (0 << 10) #define SMBCR_BURSTLENREAD_8 (1 << 10) #define SMBCR_BURSTLENREAD_16 (2 << 10) #define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10) #define SMBCR_MW_MASK (3 << 4) #define SMBCR_MW_8BIT (0 << 4) #define SMBCR_MW_16BIT (1 << 4) #define SMBCR_MW_M32BIT (2 << 4) /* SSMC status registers */ #define SSMCCSR (0x200) #define SSMCCR (0x204) #define SSMCITCR (0x208) #define SSMCITIP (0x20C) #define SSMCITIOP (0x210) _I|Mjq؂File not found. "lzT҂_S 158[Thumbnailer Entry] TryExec=/usr/bin/gdk-pixbuf-thumbnailer Exec=/usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o MimeType=image/svg+xml;image/svg+xml-compressed;   x /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef __LINUX_IF_ADDR_H #define __LINUX_IF_ADDR_H #include #include struct ifaddrmsg { __u8 ifa_family; __u8 ifa_prefixlen; /* The prefix length */ __u8 ifa_flags; /* Flags */ __u8 ifa_scope; /* Address scope */ __u32 ifa_index; /* Link index */ }; /* * Important comment: * IFA_ADDRESS is prefix address, rather than local interface address. * It makes no difference for normally configured broadcast interfaces, * but for point-to-point IFA_ADDRESS is DESTINATION address, * local address is supplied in IFA_LOCAL attribute. * * IFA_FLAGS is a u32 attribute that extends the u8 field ifa_flags. * If present, the value from struct ifaddrmsg will be ignored. */ enum { IFA_UNSPEC, IFA_ADDRESS, IFA_LOCAL, IFA_LABEL, IFA_BROADCAST, IFA_ANYCAST, IFA_CACHEINFO, IFA_MULTICAST, IFA_FLAGS, IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ IFA_TARGET_NETNSID, __IFA_MAX, }; #define IFA_MAX (__IFA_MAX - 1) /* ifa_flags */ #define IFA_F_SECONDARY 0x01 #define IFA_F_TEMPORARY IFA_F_SECONDARY #define IFA_F_NODAD 0x02 #define IFA_F_OPTIMISTIC 0x04 #define IFA_F_DADFAILED 0x08 #define IFA_F_HOMEADDRESS 0x10 #define IFA_F_DEPRECATED 0x20 #define IFA_F_TENTATIVE 0x40 #define IFA_F_PERMANENT 0x80 #define IFA_F_MANAGETEMPADDR 0x100 #define IFA_F_NOPREFIXROUTE 0x200 #define IFA_F_MCAUTOJOIN 0x400 #define IFA_F_STABLE_PRIVACY 0x800 struct ifa_cacheinfo { __u32 ifa_prefered; __u32 ifa_valid; __u32 cstamp; /* created timestamp, hundredths of seconds */ __u32 tstamp; /* updated timestamp, hundredths o