0
ˆÁË
360À¿É h /* SPDX-License-Identifier: GPL-2.0-only */
/*
* Purna Chandra Mandal, purna.mandal@microchip.com
* Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
*/
#ifndef __PIC32_SDHCI_PDATA_H__
#define __PIC32_SDHCI_PDATA_H__
struct pic32_sdhci_platform_data {
/* read & write fifo threshold */
int (*setup_dma)(u32 rfifo, u32 wfifo);
};
#endif
!ˆ
ƒ™wÈ¿É Õ !
Index of /FSS-OZR/root/lib/modules/5.14.0-687.31.1.el9_8.x86_64/kernel/drivers/pci/controller
Index of /FSS-OZR/root/lib/modules/5.14.0-687.31.1.el9_8.x86_64/kernel/drivers/pci/controller
#ˆÁË
ƒâÀ¿É q #/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright 2004-2009 Simtec Electronics
* Ben Dooks
*
* S3C - I2C Controller platform_device info
*/
#ifndef __I2C_S3C2410_H
#define __I2C_S3C2410_H __FILE__
#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
struct platform_device;
/**
* struct s3c2410_platform_i2c - Platform data for s3c I2C.
* @bus_num: The bus number to use (if possible).
* @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
* @slave_addr: The I2C address for the slave device (if enabled).
* @frequency: The desired frequency in Hz of the bus. This is
* guaranteed to not be exceeded. If the caller does
* not care, use zero and the driver will select a
* useful default.
* @sda_delay: The delay (in ns) applied to SDA edges.
* @cfg_gpio: A callback to configure the pins for I2C operation.
*/
struct s3c2410_platform_i2c {
int bus_num;
unsigned int flags;
unsigned int slave_addr;
unsigned long frequency;
unsigned int sda_delay;
void (*cfg_gpio)(struct platform_device *dev);
};
/**
* s3c_i2c0_set_platdata - set platform data for i2c0 device
* @i2c: The platform data to set, or NULL for default data.
*
* Register the given platform data for use with the i2c0 device. This
* call copies the platform data, so the caller can use __initdata for
* their copy.
*
* This call will set cfg_gpio if is null to the default platform
* implementation.
*
* Any user of s3c_device_i2c0 should call this, even if it is with
* NULL to ensure that the device is given the default platform data
* as the driver will no longer carry defaults.
*/
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platfor