0x000000000000c000 0x000000000000c03f 0x0000000000040101
0x00000000febd1000 0x00000000febd1fff 0x0000000000040200
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000380000004000 0x0000380000007fff 0x000000000014220c
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000feb80000 0x00000000febbffff 0x0000000000046200
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
     ЌАВБ      File not found.
  +   €l–Ь4э( ©і( 	ЕЂfаB¦-яї„Biї_†I|ҐЏ+ДГ 7Ґ    /* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Copyright (C) 2008-2009 Texas Instruments Inc
 *
 * isif header file
 */
#ifndef _ISIF_H
#define _ISIF_H

#include <media/davinci/ccdc_types.h>
#include <media/davinci/vpfe_types.h>

/* isif float type S8Q8/U8Q8 */
struct isif_float_8 {
	/* 8 bit integer part */
	__u8 integer;
	/* 8 bit decimal part */
	__u8 decimal;
};

/* isif float type U16Q16/S16Q16 */
struct isif_float_16 {
	/* 16 bit integer part */
	__u16 integer;
	/* 16 bit decimal part */
	__u16 decimal;
};

/************************************************************************
 *   Vertical Defect Correction parameters
 ***********************************************************************/
/* Defect Correction (DFC) table entry */
struct isif_vdfc_entry {
	/* vertical position of defect */
	__u16 pos_vert;
	/* horizontal position of defect */
	__u16 pos_horz;
	/*
	 * Defect level of Vertical line defect position. This is subtracted
	 * from the data at the defect position
	 */
	__u8 level_at_pos;
	/*
	 * Defect level of the pixels upper than the vertical line defect.
	 * This is subtracted from the data
	 */
	__u8 level_up_pixels;
	/*
	 * Defect level of the pixels lower than the vertical line defect.
	 * This is subtracted from the data
	 */
	__u8 level_low_pixels;
};

#define ISIF_VDFC_TABLE_SIZE		8
struct isif_dfc {
	/* enable vertical defect correction */
	__u8 en;
	/* Defect level subtraction. Just fed through if saturating */
#define	ISIF_VDFC_NORMAL		0
	/*
	 * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
	 * if data saturating
	 */
#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT	1
	/* Horizontal interpolation (((i-2)+(i+2))/2) */
#define	ISIF_VDFC_HORZ_INTERPOL		2
	/* one of the vertical defect correction modes above */
	__u8 corr_mode;
	/* 0 - whole line corrected, 1 - not pixels upper than the defect */
	__u8 corr_whole_line;
#define ISIF_VDFC_NO_SHIFT		0
#define ISIF_VDFC_SHIFT_1		1
#define ISIF_VDFC_SHIFT_2		2
#define ISIF_VDFC_SHIFT_3		3
#define ISIF_VDFC_SHIFT_4		4
	/*
	 * defect level shift value. level_at_pos, level_upper_pos,
	 * and level_lower_pos can be shifted up by this value. Choose
	 * one of the values above
	 */
	__u8 def_level_shift;
	/* defect saturation level */
	__u16 def_sat_level;
	/* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */
	__u16 num_vdefects;
	/* VDFC table ptr */
	struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE];
};

struct isif_horz_bclamp {

	/* Horizontal clamp disabled. Only vertical clamp value is subtracted */
#define	ISIF_HORZ_BC_DISABLE		0
	/*
	 * Horizontal clamp value is calculated and subtracted from image data
	 * along with vertical clamp value
	 */
#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED	1
	/*
	 * Horizontal clamp value calculated from previous image is subtracted
	 * from image data along with vertical clamp value.
	 */
#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED	2
	/* horizontal clamp mode. One of the values above */
	__u8 mode;
	/*
	 * pixel value limit enable.
	 *  0 - limit disabled
	 *  1 - pixel value limited to 1023
	 */
	__u8 clamp_pix_limit;
	/* Select Most left window for bc calculation */
#define	ISIF_SEL_MOST_LEFT_WIN		0
	/* Select Most right window for bc calculation */
#define ISIF_SEL_MOS