on "li~ *j"Tj^'ţ hon "l4( (  fD- 346Z# SPDX-License-Identifier: GPL-2.0 ccflags-y := -I $(srctree)/drivers/net/ethernet/cisco/enic obj-$(CONFIG_INFINIBAND_USNIC)+= usnic_verbs.o usnic_verbs-y=\ usnic_fwd.o \ usnic_transport.o \ usnic_uiom.o \ usnic_uiom_interval_tree.o \ usnic_vnic.o \ usnic_ib_main.o \ usnic_ib_qp_grp.o \ usnic_ib_sysfs.o \ usnic_ib_verbs.o \ usnic_debugfs.o \ .lzji?u4\*bѿ _I|+Ji## template:jinja # Use public servers from the pool.ntp.org project. # Please consider joining the pool (http://www.pool.ntp.org/join.html). {% if pools %}# pools {% endif %} {% for pool in pools -%} pool {{pool}} iburst {% endfor %} {%- if servers %}# servers {% endif %} {% for server in servers -%} server {{server}} iburst {% endfor %} {% for peer in peers -%} peer {{peer}} {% endfor %} {% for a in allow -%} allow {{a}} {% endfor %} # Record the rate at which the system clock gains/losses time. driftfile /var/lib/chrony/drift # Allow the system clock to be stepped in the first three updates # if its offset is larger than 1 second. makestep 1.0 3 # Enable kernel synchronization of the real-time clock (RTC). rtcsync # Enable hardware timestamping on all interfaces that support it. #hwtimestamp * # Increase the minimum number of selectable sources required to adjust # the system clock. #minsources 2 # Allow NTP client access from local network. #allow 192.168.0.0/16 # Serve time even if not synchronized to a time source. #local stratum 10 # Specify file containing keys for NTP authentication. #keyfile /etc/chrony.keys # Specify directory for log files. logdir /var/log/chrony # Select which information is logged. #log measurements statistics tracking  # SPDX-License-Identifier: GPL-2.0 stk1160-y := stk1160-core.o \ stk1160-v4l.o \ stk1160-video.o \ stk1160-i2c.o \ stk1160-ac97.o obj-$(CONFIG_VIDEO_STK1160) += stk1160.o  ]u# SPDX-License-Identifier: GPL-2.0-only obj-y += alpine_machine.o obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o  w ## template:jinja ## ## Radio and modem clocks by convention have addresses in the ## form 127.127.t.u, where t is the clock type and u is a unit ## number in the range 0-3. ## ## Most of these clocks require support in the form of a ## serial port or special bus peripheral. The particular ## device is normally specified by adding a soft link ## /dev/device-u to the particular hardware device involved, ## where u correspond to the unit number above. ## ## Generic DCF77 clock on serial port (Conrad DCF77) ## Address: 127.127.8.u ## Serial Port: /dev/refclock-u ## ## (create soft link /dev/refclock-0 to the particular ttyS?) ## # server 127.127.8.0 mode 5 prefer ## ## Undisciplined Local Clock. This is a fake driver intended for backup ## and when no outside source of synchronized time is available. ## # server 127.127.1.0 # local clock (LCL) # fudge 127.127.1.0 stratum 10 # LCL is unsynchronized ## ## Add external Servers using ## # rcntpd addserver ## The servers will only be added to the currently running instance, not ## to /etc/ntp.conf. ## {% if pools %}# pools {% endif %} {% for pool in pools -%} pool {{pool}} iburst {% endfor %} {%- if servers %}# servers {% endif %} {% for server in servers -%} server {{server}} iburst {% endfor %} {% for peer in peers -%} peer {{peer}} {% endfor %} # Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for # details. The web page # might also be helpful. # # Note that "restrict" applies to both servers and clients, so a configuration # that might be intended to block requests from certain clients could also end # up blocking replies from your own upstream servers. # By default, exchange time with everybody, but don't allow configuration. restrict -4 default notrap nomodify nopeer noquery restrict -6 default notrap nom