ttyS0 tty1
  *   ˆl–Ü4ý( ©³( 	Å€fàB¦-ÿÂƒ_†I|¥+ÁÆ S    /* SPDX-License-Identifier: GPL-2.0+ */
/*
 * max77693.h - Driver for the Maxim 77693
 *
 *  Copyright (C) 2012 Samsung Electrnoics
 *  SangYoung Son <hello.son@samsung.com>
 *
 * This program is not provided / owned by Maxim Integrated Products.
 *
 * This driver is based on max8997.h
 *
 * MAX77693 has PMIC, Charger, Flash LED, Haptic, MUIC devices.
 * The devices share the same I2C bus and included in
 * this mfd driver.
 */

#ifndef __LINUX_MFD_MAX77693_H
#define __LINUX_MFD_MAX77693_H

/* MAX77693 regulator IDs */
enum max77693_regulators {
	MAX77693_ESAFEOUT1 = 0,
	MAX77693_ESAFEOUT2,
	MAX77693_CHARGER,
	MAX77693_REG_MAX,
};

struct max77693_reg_data {
	u8 addr;
	u8 data;
};

struct max77693_muic_platform_data {
	struct max77693_reg_data *init_data;
	int num_init_data;

	int detcable_delay_ms;

	/*
	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
	 * h/w path of COMP2/COMN1 on CONTROL1 register.
	 */
	int path_usb;
	int path_uart;
};

/* MAX77693 led flash */

/* triggers */
enum max77693_led_trigger {
	MAX77693_LED_TRIG_OFF,
	MAX77693_LED_TRIG_FLASH,
	MAX77693_LED_TRIG_TORCH,
	MAX77693_LED_TRIG_EXT,
	MAX77693_LED_TRIG_SOFT,
};

/* trigger types */
enum max77693_led_trigger_type {
	MAX77693_LED_TRIG_TYPE_EDGE,
	MAX77693_LED_TRIG_TYPE_LEVEL,
};

/* boost modes */
enum max77693_led_boost_mode {
	MAX77693_LED_BOOST_NONE,
	MAX77693_LED_BOOST_ADAPTIVE,
	MAX77693_LED_BOOST_FIXED,
};

/* MAX77693 */

struct max77693_platform_data {
	/* muic data */
	struct max77693_muic_platform_data *muic_data;
	struct max77693_led_platform_data *led_data;
};
#endif	/* __LINUX_MFD_MAX77693_H */
     ÅÁÆ      File not found.
  #   ˆl–ß=¿JÅ!¶e8 EpÜ TÅ£Äƒqð?¿ÂÇ ý    /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * Media Bus API header
 *
 * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef __LINUX_MEDIA_BUS_FORMAT_H
#define __LINUX_MEDIA_BUS_FORMAT_H

/*
 * These bus formats uniquely identify data formats on the data bus. Format 0
 * is reserved, MEDIA_BUS_FMT_FIXED shall be used by host-client pairs, where
 * the data format is fixed. Additionally, "2X8" means that one pixel is
 * transferred in two 8-bit samples, "BE" or "LE" specify in which order those
 * samples are transferred over the bus: "LE" means that the least significant
 * bits are transferred first, "BE" means that the most significant bits are
 * transferred first, and "PADHI" and "PADLO" define which bits - low or high,
 * in the incomplete high byte, are filled with padding bits.
 *
 * The bus formats are grouped by type, bus_width, bits per component, samples
 * per pixel and order of subsamples. Numerical values are sorted using generic
 * numerical sort order (8 thus comes before 10).
 *
 * As their value can't change when a new bus format is inserted in the
 * enumeration, the bus formats are explicitly given a numerical value. The next
 * free values for each category are listed below, update them when inserting
 * new pixel codes.
 */

#define MEDIA_BUS_FMT_FIXED			0x0001

/* RGB - next is	0x101e */
#define MEDIA_BUS_FMT_RGB444_1X12		0x1016
#define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE	0x1001
#define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE	0x1002
#define MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE	0x1003
#define MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE	0x1004
#define MEDIA_BUS_FMT_RGB565_1X16		0x1017
#define MEDIA_BUS_FMT_BGR565_2X8_BE		0x1005
#define MEDIA_BUS_FMT_BGR565_2X8_LE		0x1006
#define MEDIA_BUS_FMT_RGB565_2X8_BE		0x1007
#define MEDIA_BUS_FMT_RGB565_2X8_LE		0x1008
#define MEDIA_BUS_FMT_RGB666_1X18		0x1009
#define MEDIA_BUS_FMT_RBG888_1X24		0x100e
#define MEDIA_BUS_FMT_RGB666_1X24_CPADHI	0x1015
#define MEDIA_BUS_FMT_RGB666_1X7X3_SPWG		0x1010
#define MEDIA_BUS_FMT_BGR888_1X24		0x1013
#define MEDIA_BUS_FMT_BGR888_3X8		0x101b
#define MEDIA_BUS_FMT_GB