MAJOR=4
MINOR=57
DEVNAME=tty57
  #   #ˆËÊƒ€kÉa–Ým_J*j"Tâjà¸TÅ£È D    #/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __SMC91X_H__
#define __SMC91X_H__

/*
 * These bits define which access sizes a platform can support, rather
 * than the maximal access size.  So, if your platform can do 16-bit
 * and 32-bit accesses to the SMC91x device, but not 8-bit, set both
 * SMC91X_USE_16BIT and SMC91X_USE_32BIT.
 *
 * The SMC91x driver requires at least one of SMC91X_USE_8BIT or
 * SMC91X_USE_16BIT to be supported - just setting SMC91X_USE_32BIT is
 * an invalid configuration.
 */
#define SMC91X_USE_8BIT (1 << 0)
#define SMC91X_USE_16BIT (1 << 1)
#define SMC91X_USE_32BIT (1 << 2)

#define SMC91X_NOWAIT		(1 << 3)

/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
#define SMC91X_IO_SHIFT_0	(0 << 4)
#define SMC91X_IO_SHIFT_1	(1 << 4)
#define SMC91X_IO_SHIFT_2	(2 << 4)
#define SMC91X_IO_SHIFT_3	(3 << 4)
#define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)

#define SMC91X_USE_DMA		(1 << 6)

#define RPC_LED_100_10	(0x00)	/* LED = 100Mbps OR's with 10Mbps link detect */
#define RPC_LED_RES	(0x01)	/* LED = Reserved */
#define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
#define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
#define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
#define RPC_LED_100	(0x05)	/* LED = 100Mbps link detect */
#define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
#define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */

struct smc91x_platdata {
	unsigned long flags;
	unsigned char leda;
	unsigned char ledb;
	bool pxa_u16_align4;	/* PXA buggy u16 writes on 4*n+2 addresses */
};

#endif /* __SMC91X_H__ */
  "   %ˆl–Ým_J*j"Tâjà¸TÅ£Ìƒh¹¿É      %0
  #   'ˆl–ß=¿JJe¶…@³qÜmõ1hßÍƒi÷ÌÀÊ c    '/* tld.h --- Declarations for TLD restriction checking.
   Copyright (C) 2004-2021 Simon Josefsson.
   Copyright (C) 2003-2021 Free Software Foundation, Inc.

   Author: Thomas Jacob, Internet24.de

   This file is part of GNU Libidn.

   GNU Libidn is free software: you can redistribute it and/or
   modify it under the terms of either:

     * the GNU Lesser General Public License as published by the Free
       Software Foundation; either version 3 of the License, or (at
       your option) any later version.

   or

     * the GNU General Public License as published by the Free
       Software Foundation; either version 2 of the License, or (at
       your option) any later version.

   or both in parallel, as here.

   GNU Libidn is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received copies of the GNU General Public License and
   the GNU Lesser General Public License along with this program.  If
   not, see <http://www.gnu.org/licenses/>. */

#ifndef TLD_H
# define TLD_H

/**
 * SECTION:tld
 * @title: tld.h
 * @short_description: TLD-related functions
 *
 * TLD-related functions.
 */

# ifndef IDNAPI
#  if defined LIBIDN_BUILDING && defined HAVE_VISIBILITY && HAVE_VISIBILITY
#   define IDNAPI __attribute__((__visibility__("default")))
#  elif defined LIBIDN_BUILDING && defined _MSC_VER && ! defined LIBIDN_STATIC
#   define IDNAPI __declspec(dllexport)
#  elif defined _MSC_VER && ! defined LIBIDN_STATIC
#   define IDNAPI __declspec(dllimport)
#  else
#   define IDNAPI
#  endif
# endif

# ifdef __cplusplus
extern "C"
{
# endif

  /* Get size_t. */
# include <stdlib.h>

  /* Get uint32_t. */
# include <idn-int.h>

  /* *INDENT-OFF* */

  /* Why INDENT-OFF?  See stringprep.h */

  /**
   * Tld_table_element:
   * @start: Start of range.
   * @end: End of range, end == start if single.
   *
   * Interval of valid code points in the TLD.
   */
  struct Tld_table_element
  {
    uint32_t start;
    uint32_t end;
};
  typedef struct Tld_table_element Tld_table_element;

  /**
   * Tld_table:
   * @name: TLD name, e.g., "no".
   * @version: Version string from TLD