usb:v1D6Bp0001d0514dc09dsc00dp00ic09isc00ip00in00
_I|M jq File not found.
0 lzD
2-
0
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
*
* Copyright (C) 2007 Christian Pellegrin
*/
#ifndef _LINUX_SERIAL_MAX3100_H
#define _LINUX_SERIAL_MAX3100_H 1
/**
* struct plat_max3100 - MAX3100 SPI UART platform data
* @loopback: force MAX3100 in loopback
* @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
* @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook
* called on suspend and resume to activate it.
* @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
* flow ctrl is possible but you have less CPU usage)
*
* You should use this structure in your machine description to specify
* how the MAX3100 is connected. Example:
*
* static struct plat_max3100 max3100_plat_data = {
* .loopback = 0,
* .crystal = 0,
* .poll_time = 100,
* };
*
* static struct spi_board_info spi_board_info[] = {
* {
* .modalias = "max3100",
* .platform_data = &max3100_plat_data,
* .irq = IRQ_EINT12,
* .max_speed_hz = 5*1000*1000,
* .chip_select = 0,
* },
* };
*
**/
struct plat_max3100 {
int loopback;
int crystal;
void (*max3100_hw_suspend) (int suspend);
int poll_time;
};
#endif
!
MazD
4-
Index of /FSS-OZR/root/sys/dev/char/4:48/subsystem/tty21
Index of /FSS-OZR/root/sys/dev/char/4:48/subsystem/tty21
e¾
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Name : qnx6_fs.h
* Author : Kai Bankett
* Function : qnx6 global filesystem definitions
* History : 17-01-2012 created
*/
#ifndef _LINUX_QNX6_FS_H
#define _LINUX_QNX6_FS_H
#include
#include
#define QNX6_ROOT_INO 1
/* for di_status */
#define QNX6_FILE_DIRECTORY 0x01
#define QNX6_FILE_DELETED 0x02
#define QNX6_FILE_NORMAL 0x03
#define QNX6_SUPERBLOCK_SIZE 0x200 /* superblock always is 512 bytes */
#define QNX6_SUPERBLOCK_AREA 0x1000 /* area reserved for superblock */
#define QNX6_BOOTBLOCK_SIZE 0x2000 /* heading bootblock area */
#define QNX6_DIR_ENTRY_SIZE 0x20 /* dir entry size of 32 bytes */
#define QNX6_INODE_SIZE 0x80 /* each inode is 128 bytes */
#define QNX6_INODE_SIZE_BITS 7 /* inode entry size shift */
#define QNX6_NO_DIRECT_POINTERS 16 /* 16 blockptrs in sbl/inode */
#define QNX6_PTR_MAX_LEVELS 5 /* maximum indirect levels */
/* for filenames */
#define QNX6_SHORT_NAME_MAX 27
#define QNX6_LONG_NAME_MAX 510
/* list of mount options */
#define QNX6_MOUNT_MMI_FS 0x010000 /* mount