00
     ˆ¾Àƒh¹ÃÂ      0
     	ˆÁÀƒ`¿ÃÂ 	Í    	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPIBSG_H
#define _UAPIBSG_H

#include <linux/types.h>

#define BSG_PROTOCOL_SCSI		0

#define BSG_SUB_PROTOCOL_SCSI_CMD	0
#define BSG_SUB_PROTOCOL_SCSI_TMF	1
#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2

/*
 * For flag constants below:
 * sg.h sg_io_hdr also has bits defined for it's flags member. These
 * two flag values (0x10 and 0x20) have the same meaning in sg.h . For
 * bsg the BSG_FLAG_Q_AT_HEAD flag is ignored since it is the deafult.
 */
#define BSG_FLAG_Q_AT_TAIL 0x10 /* default is Q_AT_HEAD */
#define BSG_FLAG_Q_AT_HEAD 0x20

struct sg_io_v4 {
	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
	__u32 protocol;		/* [i] 0 -> SCSI , .... */
	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
				   management function, .... */

	__u32 request_len;	/* [i] in bytes */
	__u64 request;		/* [i], [*i] {SCSI: cdb} */
	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
	__u32 request_attr;	/* [i] {SCSI: task attribute} */
	__u32 request_priority;	/* [i] {SCSI: task priority} */
	__u32 request_extra;	/* [i] {spare, for padding} */
	__u32 max_response_len;	/* [i] in bytes */
	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */

        /* "dout_": data out (to device); "din_": data in (from device) */
	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
				   dout_xfer points to array of iovec */
	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
	__u64 dout_xferp;	/* [i], [*i] */
	__u64 din_xferp;	/* [i], [*o] */

	__u32 timeout;		/* [i] units: millisecond */
	__u32 flags;		/* [i] bit mask */
	__u64 usr_ptr;		/* [i->o] unused internally */
	__u32 spare_in;		/* [i] */

	__u32 driver_status;	/* [o] 0 -> ok */
	__u32 transport_status;	/* [o] 0 -> ok */
	__u32 device_status;	/* [o] {SCSI: command completion status} */
	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
	__u32 info;		/* [o] additional information */
	__u32 duration;		/* [o] time to complete, in milliseconds */
	__u32 response_len;	/* [o] bytes of response actually written */
	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
	__u32 spare_out;	/* [o] */

	__u32 padding;
};


#endif /* _UAPIBSG_H */
  #   ˆl–ß=¿JÅ!¶e8 EpÜ TÅ£ÁƒhBsÀÄÃ ‚    /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _ATMMPC_H_
#define _ATMMPC_H_

#include <linux/atmapi.h>
#include <linux/atmioc.h>
#include <linux/atm.h>
#include <linux/types.h>

#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)

#define MPC_SOCKET_INGRESS 1
#define MPC_SOCKET_EGRESS  2

struct atmmpc_ioc {
        int dev_num;
        __be32 ipaddr;              /* the IP address of the shortcut    */
        int type;                     /* ingress or egress                 */
};

typedef struct in_ctrl_info {
        __u8   Last_NHRP_CIE_code;
        __u8   Last_Q2931_cause_value;
        __u8   eg_MPC_ATM_addr[ATM_ESA_LEN];
        __be32  tag;
        __be32  in_dst_ip;      /* IP address this ingress MPC sends packets to */
        __u16  holding_time;
        __u32  request_id;
} in_ctrl_info;

typedef struct eg_ctrl_info {
        __u8   DLL_header[256];
        __u8   DH_length;
        __be32  cache_id;
        __be32  tag;
        __be32  mps_ip;
        __be32  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
        __u8   in_MPC_data_ATM_addr[ATM_ESA_LEN];
        __u16  holding_time;
} eg_ctrl_info;

struct mpc_parameters {
        __u16 mpc_p1;   /* Shortcut-Setup Frame Count    */
        __u16 mpc_p2;   /* Shortcut-Setup Frame Time     */
        __u8 mpc_p3[8]; /* Flow-detection Protocols      */
        __u16 mpc_p4;   /* MPC Initial Retry Time