(null) File not found.  l_I|Mdv &K Index of /anon_sym/anon/sys/dev/char/4:21/subsystem/ttyS0/device

Index of /anon_sym/anon/sys/dev/char/4:21/subsystem/ttyS0/device

 NameLast modifiedSizeDescription
 Parent Directory   -  
 uevent 2026-10-11 15:21 4.0K 
 tty/ 2026-10-09 14:20 -  
 subsystem/ 2026-10-11 15:15 -  
 resources 2026-10-11 15:21 4.0K 
 power/ 2026-10-11 15:18 -  
 options 2026-10-11 15:21 4.0K 
 id 2026-10-11 15:21 4.0K 
 firmware_node/ 2026-10-11 14:08 -  
 driver/ 2026-10-11 15:20 -  
 00:00:0/ 2026-10-11 15:17 -  
+ l4( (  fB- ?_I|+> /* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ /* * include/linux/serial_reg.h * * Copyright (C) 1992, 1994 by Theodore Ts'o. * * Redistribution of this file is permitted under the terms of the GNU * Public License (GPL) * * These are the UART port assignments, expressed as offsets from the base * register. These assignments should hold for any serial port based on * a 8250, 16450, or 16550(A). */ #ifndef _LINUX_SERIAL_REG_H #define _LINUX_SERIAL_REG_H /* * DLAB=0 */ #define UART_RX 0 /* In: Receive buffer */ #define UART_TX 0 /* Out: Transmit buffer */ #define UART_IER 1 /* Out: Interrupt Enable Register */ #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ /* * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 */ #define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ #define UART_IIR 2 /* In: Interrupt ID Register */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt